Industry news
-
Classification of Commonly Used Cemented Carbides and Their Applications
2023-04-28The main components are tungsten carbide (WC) and cobalt, and the grade is indicated by the code YG (hard and cobalt in Hanyu Pinyin), followed by the percentage value of cobalt content. For example, YG6 is a tungsten cobalt carbide with a cobalt content of 6％ and a tungsten carbide content of 94％.
-
What Types of Coatings are Available for HSS Saw Blades?
2023-04-10Currently, there are four common coatings on HSS saw blades: heptakote, oxide, titanium and rose gold. These four coatings, there will also be performance differences.
-
Ten Countries with the Richest Mineral Resources in the World
2023-03-28Mineral resources are very important natural resources, formed after millions of years or even hundreds of millions of years of geological changes, which is an important material basis for the development of social production. Minerals are extremely important strategic resources for all countries in the world, and are the focus of the game of all countries in the world. The distribution of global mineral resources is extremely uneven, with the top ten countries accounting for more than 80％ of global mineral resources.
-
Waterjet Gauze Tube Applications
2023-03-15Carbide high pressure waterjet cutting nozzles, also known as carbide waterjet gauze tubes, abrasive nozzles, water nozzles, waterjets, waterjet gauze tubes, are mainly used for metal cutting, ceramic cutting, stone cutting, glass cutting and other material cutting.
-
Application of Carbide Band Saw Blade
2023-03-02At present, in mechanical manufacturing, due to the rapid upgrading of products, there are also higher requirements for the selection of parts. Especially in the manufacturing of aerospace, large power stations and ships, some difficult to process materials, such as high-temperature alloys, titanium alloys, heat-resistant stainless steel, composite materials, have been widely used, among which the efficient processing of high-temperature alloy materials, which are widely used and commonly used, has attracted more attention.
-
Introduction to Manufacturing Method and Process of Cemented Carbide Die
2023-02-23The selected material is cemented carbide {tungsten steel}. Generally, the drawing die is made of cemented carbide YG8 and YG6, and the shaping die is made of soft and ductile materials such as YG15 and YG20.
-
Types of Cemented Carbide Sintering
2023-02-02Sintering is a special heat treatment process, whose purpose is to transform porous powder into alloy with certain structure and properties. Sintering is the last procedure in the production process of cemented carbide. The structure and properties of the alloy depend on many process factors before sintering, but under some conditions, the sintering process has a significant, even decisive impact on it.