When using circular blades, the following should be observed to ensure safety and prolong blade life:

Select the proper blade:

Select the proper blade for the type and thickness of the material.

Check that the speed of the blade matches the speed of the equipment.

Install the blade:

Ensure that the equipment is powered off before installation.

Ensure that the blades are securely mounted and correctly positioned on the shaft.

Use the correct tools to install and remove the blades and avoid using excessive force.

Check blade condition:

Check blades for cracks, deformation or damage before use.

Make sure blades are clean and free of oil or debris.

Operate in a standardized manner:

Wear appropriate protective equipment such as protective glasses and gloves.

Maintain a stable position while cutting and hold the equipment firmly with both hands.

Maintain smooth contact between the blade and the material during cutting, do not use excessive force.

Maintenance:

Clean the blade in time after cutting to prevent the accumulation of chips from affecting the next use.

Regularly check and replace the blades, avoid using the blades with serious wear and tear.

Store the blade properly to prevent moisture and mechanical damage.

Safety Precautions:

Do not change the blades at will, and observe the regulations in the equipment manual.

Pay attention to the surrounding environment during operation and prevent others from entering the working area accidentally.

Avoid prolonged continuous work, appropriate rest to prevent fatigue operation.

Precautions for the use of circular blades

1. When not using the circular blade, need to hang the blade vertically on a dry shelf, can not put the circular blade flat, flat will lead to deformation of the circular blade.

2. Round blade teeth hard and sharp, can not collide, fall to the ground, need to be gently held and put.

3. When operating, you need to bring protective cover, work gloves, safety helmet, safety shoes, protective glasses.

4. Before installing the circular blade, you need to confirm the performance of the saw table, the purpose, to ensure that the cutting direction indicated by the arrow of the circular blade is the same as the direction of rotation of the saw table. Can not be installed in the opposite direction, installed in the wrong direction may lead to blade teeth off, to prevent accidents.

5. When installing the circular blade, you need to check the circular blade whether there is cracked, crooked, make up for the flat, drop teeth and other phenomena before installation.

6. After installation, need to confirm whether the center hole of the circular blade is firmly fixed in the flange of the saw table, there are gaskets need to be gasket set, and then, gently push the hand to confirm whether the circular blade rotation is eccentric shaking.

7. When using, please do not exceed the specified higher speed.

8. Pre-conversion on the new blade before use, the use of pre-rotation of one minute before use, so that the saw table into the working state, before cutting.

9. The hardness requirements of the circular blade is more important, sometimes you material is better, the hardness requirements unreasonable blade will appear chipping, soft mouth

Hunan Jetvision Industrial Co.Ltd is one of the leading Tungsten carbide manufacturers and suppliers with over 20years experience of tungsten carbide products production and technology, It's a professional supplier which provide kinds of tungsten carbide products, such as tungsten carbide cutter blade, carbide ball, carbide ball mill tank, carbide grinding ball jar, cemented carbide rod blank, cemented carbide wire drawing dies, tungsten carbide seal rings, tungsten carbide plate, tungsten carbide bushing, carbide tube, tungsten carbide button, carbide mining inserts, carbide blade, tungsten carbide strip, carbide dies, carbide brazed tips, tungsten carbide no standard products, carbide studs, tungsten carbide customized components which are widely used in machinery, mining, construction, oil and drill, industrial engineering etc.

Keyword: cemented carbide cutter blade supplier, carbide circular cutting knives manufacturer, carbide circular cutting discs price, Carbide disc knives supplier, tungsten carbide blade in stock, buy cheap cemented Carbide disc cutters, Tungsten carbide circular blades manufacturer, carbide disc knives price list, cemented carbide disc cutter supplier, wholesales carbide circular blade, Tungsten Carbide Slitting Blade Circular Knives in stock, buy solid carbide circular knives, buy cheap carbide circular blade price, Trusted tungsten carbide disc blade made in China, sintered carbide circular blade in stock